Pyle 8 Inch Car Audio Subwoofers Picture
Pyle PLD12WD 1-Way 12" Car Subwoofer
Enhance your car audio system’s overall performance with the Pyle PLD12WD 1-way subwoofer. Featuring a 3200-watt peak power output, this Pyle subwoofer produces a rich and powerful audio response. Built with a 2-inch 4 layer dual voice coil, the Pyle PLD12WD provides you with a tight bass and all-in-all a great sound performance. Incorporating a dual 4-Ohm load impendence, this device generates more current to your system. With a 92 dB sensitivity, this Pyle subwoofer efficiently converts power to clear sound. Sporting a diamond cut aluminum die-cast basket, this 1-way subwoofer offers superior durability and a long lifespan. Moreover if you are looking for a punchy bass without compromising on mid-range quality, this Pyle subwoofer is just for you.
Pyle PL1290BL 1-Way 12" Car Subwoofer
The Pyle PL1290BL is a powerful and visually attractive 1-way car subwoofer dedicated to boosting the bass in your music. To render chest-thumping bass, this Pyle car subwoofer is powered by an injection-molded cone woofer and a 2.5-inch high-temperature dual kapton voice coil. The Pyle PL1290BL speaker has a frequency response of up to 23.2 Hz, a sensitivity of 85 dB, and a 1200-watt peak power handling. The performance and durability of this 1-way car subwoofer is enhanced by the non-fatiguing big rubber suspension, a rubber magnet boot supporting the powerful 90 oz. magnet, and a flat progressive spider. The Pyle car subwoofer is installed into a mounting cutout of 11.61 inches with a 6.52-inch depth, and has an overall diameter of 12.2 inches. The entire assembly of the Pyle PL1290BL speaker sits securely in an attractive blue chrome-plated steel basket.
Pyle PLBWS212 1-Way 12" Car Subwoofer
The Pyle PLBWS212 is a 1-way car subwoofer that can be installed in the rear seat of a car or anywhere else. This 12-inch subwoofer has two speakers and it comes with installation instructions; however, an auto body shop can install them for a fee. This Pyle car subwoofer has a frequency response between 35 Hz and 1 kHz with an impedance of 4 ohm. In addition, the Pyle PLBWS212 has a 1200-watt peak power handling, which is quite impressive from a car subwoofer. Made of a poly/plastic material, this 12-inch subwoofer is durable with a sleek design that improves the interior aesthetics of a car. There are also neon woofer rings for additional style. The Pyle PLBWS212 has a 2-inch aluminum voice coil and two tuned ports for high-quality performance and impactful sound. This Pyle car subwoofer is built to last, while providing constant and impressive sound to all car passengers.
Pyle PLBW84 1-Way 8" Car Subwoofer
Experience mind blowing sounds, using the Pyle PLBW84 subwoofer, which is perfect for your automobile. The Pyle PLBW84 is an 8-inch subwoofer that fits perfectly in any type of enclosure. This Pyle car subwoofer features a blue injection molded cone that provides an outstanding midbass response. The flat progressive spider design improves the mechanical stability of this 8-inch subwoofer, thereby increasing the lifespan of the speaker and providing crystal clear sounds. Using a silver plated terminal, you can connect your Pyle car subwoofer to an audio player and experience distortion-free sounds.
Pyle PLSQ12D 12" Car Subwoofer
The Pyle PLSQ12D 12” Car Subwoofer is a square 12” subwoofer that makes use of a special-treatment silver polypropylene cone and a wide rubber surround to deliver bass with low distortion while running cool. This Pyle subwoofer comes in a black square-shaped steel basket, and with a bumped vented extended pole piece. This Pyle 12” subwoofer uses two 3” Kapton voice coils. The Pyle PLSQ12D 12” Car Subwoofer has an impedance rating of 4 ohms (per voice coil) and a peak power output rating of 1200 watts. This 12” subwoofer has a sensitivity rating of 90 dB, and an overall diameter of 13”.
Pyle PLBW154 1-Way 15" Car Subwoofer
The Pyle PLBW154 features a 1500 Watt Max power handling for a powerful sound output. As the output level (SPL) of this Pyle car subwoofer is 86 dB, it delivers higher sound quality. Get more flexibility in wiring your sound system as this 15-inch car subwoofer features Dual voice coil. Thanks to the rubber magnet boot, this Pyle car subwoofer does not damage your furniture surface. The Flat Progressive Spider feature of this 15-inch car subwoofer provides maximum control at excursion limits. The Pyle PLBW154 delivers great low range frequency response and offers deep bass handling.
Pyle PLSQ10D 1-Way 10" Car Subwoofer
The Pyle PLSQ10D is a 10-inch subwoofer that complements your car???s stereo system and boosts your bass to a chest-thumping intensity. The silver special treated polypropylene cone of this Pyle car subwoofer reproduces deep bass with exceptional clarity. The Pyle PLSQ10D???s cone comes with a wide rubber surround system that withstands the strenuous job of producing bass frequencies. This Pyle car subwoofer has a peak power output of 1,200 watts, which yields proper handling of music reproduction. Featuring 2.5-inch, high-temperature, Kapton dual voice coils, this 10-inch subwoofer ensures you get distortion-free sound and offers wiring flexibility. In addition, the Kapton voice coil effectively dissipates heat, prolonging the service life of this Pyle car subwoofer.
Pyle PLBW124 1-Way 12" Car Subwoofer
Music will never sound the same again with the Pyle PLBW124. The vibrant blue cone of the Pyle PLBW124 makes it a treat to have in your car and is especially great for bass lovers. This Pyle 1-way subwoofer has a 1200-watt peak power handling capability that lets you play your music loud and clear. With a sensitivity of 84dB and impedance of 4 ohm, this Pyle 12-inch car subwoofer delivers smooth and flawless sound. This 12 inch Pyle 1-way subwoofer comes with a rubber surround material with a non-enclosed mounting. Set the road on fire with this 1-way Pyle 12-inch car subwoofer subwoofer.
Pyle - PLBW104, Car Subwoofers
1000W 10in Blue Wave Series Dual 4 Ohm Subwoofer
Pyle PL1090BL 1-Way 10" Car Subwoofer
For maximum performance, the Pyle PL1090BL uses a blue injection molded cone, non-fatiguing big rubber suspension, vented extended pole piece, and a high temperature voice coil. The blue injection molded cone on the Pyle car subwoofer is rigid and durable so that it is able to produce loud and deep bass sounds for extended periods of time. Additionally, the 10-inch automotive subwoofer has a non-fatiguing rubber surround, which ensures that the cone can vibrate freely without losing quality over time. To improve performance of the Pyle car subwoofer, it has a vented extended pole piece to keep cool air moving through and to lower the operating temperature. The Pyle PL1090BL features a 2-inch high temperature dual Kapton voice coil, which is resistant to high temperatures and won’t degrade due to heat. The 10-inch automotive subwoofer has a large surface area to ensure its high output levels as well. Additionally, the Pyle car subwoofer has two 70-ounce magnets, 1000-watt maximum power handling, and 4-Ohm impedance per coil to ensure that the subwoofer can achieve maximum output.
Pyle PLCHW12 1-Way 12" Car Subwoofer
Retrofit your car with the Pyle PLCHW12 and enjoy pleasant music while on the go. This Pyle car subwoofer features Titanium injected polypropylene cone that fits easily and outputs amazing sound quality. The Chrome-plated dome and steel basket on this Pyle Audio System gives it a different and unique look. A wide rubber surround on this Pyle PLCHW12 protects it, in case you keep any heavy thing on it. This Pyle Audio System delivers crystal clear sound with excellent quality. Stay assured of high performance as this Pyle car subwoofer distributes the beats with 2400 watts of peak power. So, go ahead and make your journey a memorable one with family, friends and the Pyle PLCHW12
Pyle PLRL572 2-Way 5" x 7" Car Speaker
Packaged as a pair of two-way speakers, the Pyle PLRL572, coupled with a stereo system, provides the ultimate car audio experience from the 5 x 7-inch product. The Pyle 2-way speakers are engineered with electroplated red polypropylene cone that gives these speakers a sense of design and style. Additionally, the car speakers feature 1-inch high-temperature Ferro Fluid Enhanced voice coil and a rubber magnet boot cover that give off a rich and powerful sound. The 2-way design of the Pyle PLRL572 speakers allows for the low- and mid-range sounds to project well. Furthermore, the Pyle 2-way speakers are designed with 100 watts RMS and 200 watts peak power, which it a great entry to mid-level speaker set to have. The car speakers can be installed into any vehicle that can accommodate a mounting depth of 2.25 inches. The Pyle PLRL572 car speakers are a great product that produces a terrific sound from a small package.
Pyle PLG573 3-Way 5" x 7" Car Speaker
High performance without the high cost is the motto of any Pyle 5 x 7-inch car speaker. The Pyle brand provides exceptional quality without high markup costs, allowing anyone to own a great audio system. That’s exactly what buyers will get with a Pyle PLG573 three-way automotive speaker. A heavy-duty steel basket surrounds a fabricated poly injected cone and butyl rubber surround for long lasting sound quality. The Pyle 5 x 7-inch car speaker is only enhanced by its internal components like a high-temperature aluminum voice coils and a Barrium Ferrite magnet for extra durability. When it comes to big output, put those old speakers aside. The Pyle PLG573 normally works at 120 watts, but it can reach 240 watts with the right amp, producing potent output levels for stunning music tracks. Just one three-way automotive speaker completely changes the feel of the audio system. Change out those old car speakers with a brand new, high-quality Pyle 5 x 7-inch car speaker and never look back.
Pyle PPA12 1-Way 12" Car Subwoofer
This non-powered 1-way car subwoofer has cloth surrounding material and is non-enclosed, so the user should mount it together with other speaker components. As a professional premium subwoofer, this Pyle PPA12 is used not only for car audio systems as intended, but for home and work situations as well. Known for its frequent longevity and clear, deep bass projection, this Pyle car subwoofer is a great solution for many customers. Its stamped steel basket make this Pyle PPA12 attractive in a variety of different car interiors. With 8 ohms of impedance, this Pyle car subwoofer has twice as much impedance as most car subwoofers, which means that it can accept more electrical current. This is an advantage if it connects to an amplifier. Its stiff paper cone gives this Pyle PPA12 less ringing than its metal cone counterparts. With a reputation for projecting a very tight bass sound at relatively high volumes, this 1-way car subwoofer is an excellent option for users who love deep, loud sound.
Pyle PLW1590 1-Way 15" Car Subwoofer
Enhance the beats of your music with the Pyle PLW1590. This Pyle subwoofer is a component system that delivers optimal sound quality for a completely immersive experience. This Pyle car subwoofer has a simple 1-way construction that does exactly what itÂ’s supposed to do Â– produce bass. The Poly/Plastic woofer material of this Pyle subwoofer gives you a powerful bass sound that will get your adrenaline flowing. This Pyle car subwoofer has a rubber surround material that gives your sound a touch of perfection. The Pyle PLW1590 does not come with a manufacturer enclosure so you have the freedom to fit a custom one.
JL Audio 8W7-3 1-Way 8" Car Subwoofer
Boost your car's music system with the JL Audio 8W7-3 speakers that render earth-shattering performance with its 1000 Watt peak power output. With a frequency response of 23Hz-250Hz, this JL Audio 1000W subwoofer balances the tones of the music for better audio results. This JL Audio car speaker comes with an 8-inch subwoofer and polypropylene woofer cone, surrounded by polyester foam for clear and loud sound. The JL Audio 8W7-3 is sealed with a solid cast-alloy basket, which helps in delivering a natural and profound bass response. The black finish of this JL Audio 1000W subwoofer looks absolutely stunning, when graced in your car. Experience the theatre-like sound outcome with this JL Audio car speaker and make your long journeys truly worthwhile.
Pyle PLBWS210 10" Car Subwoofer
Pyle PLBWS210 1,000-watt car subwoofer is a dual system from the Blue Wave Series. This Pyle 10-inch car subwoofer features power handling with stunning performance. With a peak power performance of 1,000 watts per pair at 500 watts each and an RMS at 500 watts per pair with 250 watts each, the Pyle PLBWS210 1,000-watt car subwoofer is a force to be reckoned with. The impedance is at 4 ohms each with a final impedance of 2 ohms. This Pyle 10-inch car subwoofer has a clear acrylic glass front window and neon lights in the speaker rings that emit a calming blue glow for extra style and class. The 2-inch aluminum high temperature voice coil is just part of the speaker that gives stunning quality. The cone is silver polypropylene with woofer surround in black rubber. The size of this car subwoofer is 14 x 25.5 x 13 inches. Overall, Pyle PLBWS210 is a great subwoofer to add to a component speaker system.
Pyle PLG463 3-Way 4" x 6" Car Speaker
The Pyle PLG463 is a three-way automotive speaker that provides a mid-range sound that is ideal for listening to a wide variety of music genres. The Pyle 4x6-inch car speaker boasts 180 watts of peak power that delivers sound throughout an entire vehicle with ease. The Pyle 4x6-inch car speaker has a yellow poly-injected cone and 30 oz magnet structure with a rubber magnet cover. These elements are important and reduce distortion as sound passes through the speaker itself. The speaker also features a butyl rubber surround for protecting the speaker. The Pyle PLG463 is a three-way automotive speaker that uses a high temperature aluminum voice coil, a 0.5-inch neodymium dome midrange, and a super film tweeter for overall sound enhancement. The Pyle 4x6-inch car speaker installs within an OEM location. This speaker is connected to a vehicle using a standard speaker wire and can be installed in a number of brands and models. The car speaker features a frequency between 70 Hz and 40 kHz and has 4-Ohm impedance.
Pyle PLTA12N 1-Way 12" Car Subwoofer
Included in the construction of the Pyle car subwoofer is a silver electroplated polypropylene cone, built-in high output amplifier, a bass reflex vent, for extra sub-bass response, and high-quality vinyl wrapping. This 12-inch car subwoofer also includes a 2-inch aluminum voice coil, and the entire device is treated with special black rubber edge suspension, for protection against the elements of the weather, nicks, and scratches. The Pyle PLTA12N also has a blue LED light behind the grill, making it easier for the user to see all the parts in her device. This tube on this Pyle car subwoofer has a height of 15.4 inches, a width of 22.8 inches, and a depth of 13.8 inches. The minimum frequency that the Pyle PLTA12N can handle is 25 Hz, and the maximum frequency that is picked up is 600 kHz. With such a high maximum frequency, the user is provided with a very wide range of high treble tones from her 12-inch car subwoofer, with clear, full, accurate sound. This Pyle car subwoofer has an impedance of 4 Ohms.
RE Audio XXX12D2 1-Way 12" x 12" Car Subwoofer
Enhance your car system with the RE Audio XXX12D2 that can handle up to 4000 watt RMS so you can make the town dance to your tune. This RE Audio Car Speaker has 92 excursion which is higher than the SX and MXÂ series to hit big range of frequencies. The nominal impedance of 2 ohms in this RE Audio Car Subwoofer gives you the required amount of sound you require. This RE Audio Car Speaker has a rubber material that protects the speaker from getting damaged in case of jerks. With overall diameter of 13 inch, the RE Audio XXX12D2 can easily fit any place of your car conveniently.
RE Audio SEX10D4 1-Way 3" Car Subwoofer
This RE Audio car subwoofer is designed for people who want unparalleled sound. It's also immersive and reliable. The RE Audio SEX10D4 is a capable device at home or on-the-go. With the small sized 3-inch loudspeaker featured on this RE Audio car subwoofer, you can choose where to install it to best generate deep notes to fill out the full musical range. This component car subwoofer comes with ample 83 dB sensitivity, therefore you can listen to your tunes at your preferred volume level with a powerful audio amp. The superb audio quality found on the RE Audio SEX10D4 enables you to hear your favorite artists with great pleasure. This RE Audio car subwoofer enables you to perceive throbbing bass notes with its wide frequency response. Featuring high-end power handling, this component car subwoofer generates spectacular sound when paired with an appropriately powered amplifier. In addition, you can bring your aural enjoyment alive with clear sound since the RE Audio SEX10D4 features an extraordinary transducer.
Pyle PLW12 1-Way 12" Car Subwoofer
The Pyle PLW12 is a high performance and reliable subwoofer that proves to be a great sound system for your car. The 12-inch speaker of this Pyle 1-way car subwoofer provides you with deep bass and amazing high frequency response. The 2-inch voice coil of the Pyle PLW12 car speaker gives you smooth and clean audio. The Pyle PLW12 has an impedance of 4 ohms that delivers real and dynamic sound for a complete musical experience. You get loud and defined sound with an efficiency of 88dB in this Pyle 1-way car subwoofer. The peek power handling of 2400 watts in this Pyle car speaker produces rich and powerful sound that fills your car with superb sound vibration so that you get an outstanding musical feel.
Pyle PLG6C 2-Way 6.5" Car Speaker
A 2-way audio system designed for excellence, the Pyle PLG6C Car Component System is a delight for your auditory senses. The 6.5 powerful car speaker comprises a 1 dome tweeter and poly/plastic woofer. The woofer is surrounded with butyl rubber for added stability and strength. Highly responsive to a range of frequencies from 50 Hz to 5 kHz, the system delivers crisp highs and deep lows. Capable of distributing beats with 400 watts of power, the Pyle PLG6C Car Component System sports a pair of passive crossover network. The Pyle PLG6C is an impressive car speaker system for all your demanding audio needs.
Pyle PDBT35 1-Way 1" Car Speaker
Sold as a single unit and featuring a high sound pressure level, the chrome Pyle PDBT35 car speaker is a titanium super tweeter. Featuring a die-cast aluminum frame, this 1-way car speaker has a diameter of 2.25 inches, depth of 2.8 inches, width of 2.75 inches, and a weight of 1.25 lbs. Its 500-watt peak power handling gives this Pyle PDBT35 strong resonance sound. With an impedance of 4 ohms which includes double coils, this 1-inch Pyle car speaker is a non-powered tweeter. Its 108 dB of sensitivity complements this 1-way car speaker's frequency responses which range from 2000 Hz to 22 kHz. To achieve the best overall sound, users should get a 3.3 UF 100V capacitor to run this Pyle PDBT35. This Pyle car speaker's overall power handling reaches 125 watts RMS as well as a maximum power output of 500 watts. For those who are looking for a high-quality tweeter that produces strong sounds, this Pyle car speaker fulfills all those needs.
Pyle PL63BL 3-Way 6.5" Car Speaker
PYLE Audio is a global leader in design, manufacture and distribution of high-quality audio products that deliver high-end performance at an affordable price. PYLE Audio is the name you can trust.
Pyle PLG62 2-Way 6.5" Car Speaker
The Pyle PLG62 2-way car speaker system with a woofer and 1/2-inch neodymium dome tweeter offers an outstanding mid and high frequency response. The woofer of the Pyle PLG62 features a Butyl rubber surround that absorbs vibrations and prevents it from being displaced as it flexes out. An RMS power output of 240 watts in these Pyle car speakers ensure proper handling of sustained music reproduction. This 2-way car speaker system has a frequency response ranging from 65 Hz to 20 kHz, for faithful reproduction of sound with minimal distortion. The protective grills in these Pyle car speakers add to the durability.
Pyle PL573BL 3-Way 5" x 7" Car Speaker
One Pair 5 X 7 Three-way Triaxial Speaker Systems 150 Watts Rms Power 300 Watts Max Power Non-fatiguing Butyl Rubber Surround 1 High Temperature ASV Voice Coil Standard 5 x 7/6 X 8 Size Fits OEM Locations Blue Poly Injection Cone 20 oz Magnet Structure 1 Neodymium Film Dome Midrange 3/4 Piezo Tweeter Impedance: 4 Ohm Sensitivity: 90 dB Frequency Response: 80Hz - 20Khz Includes Grills, Wires And Mounting Hardware Mounting Depth: 2.25
Pyle PL683BL 3-Way 6" x 8" Car Speaker
Offering a durable build and features that offer better sound, the Pyle PL683BL includes a triaxial speaker design. This Pyle speaker includes a cone that is injected with poly for better durability. The car speaker includes a Piezo tweeter at 0.75 inches and offers the use of neodymium for durability. The tweeter of the Pyle speaker includes high-temperature durability in its one voice coil. Features of the Pyle PL683BL include 4 ohm impedance, a maximum power handling of 180 watts RMS, and a magnet structure that weighs 40 ounces. The sensitivity on the Pyle speaker is 91 dB. Additionally, the car speaker includes a frequency response range from 70 kHz to 20,000 Hz for a better response and enhanced music listening. This car speaker weighs just over 4 lbs and is made to work with most cars in place of their standard speaker systems without the need for specialty mounting.
Pyle PL53BL 3-Way 5.25" Car Speaker
Enjoy your favorite music on the go with the Pyle PL53BL coaxial car speaker. This Pyle car speaker system comes in a combination of blue and black color that enhances the interiors of your car. This pair of stylish coaxial car speaker is 5.25 inches in size and has a rubber surround to protect it. The Pyle PL53BL has a 1 inch high temperature ASV voice coil which helps in producing high quality audio output with low distortion. Additionally, the Pyle PL53BL has a poly injection that allows music to resonate with full power, thus letting you enjoy high quality music. This pair of Pyle car speaker allows for 100 Hz Â– 20 Khz frequency response and includes Â¾ inch piezo tweeter. The Pyle PL53BL is a must buy for any music lover.
Pyle PL6984BL 4-Way 6" x 9" Car Speaker
Give your car a perfect gift as the Pyle PL6984BL speaker gives you foot-thumping sound that leaves a long-lasting effect on you. With a frequency response of 50Hz-20Khz, this Pyle coaxial speaker delivers balanced sound by leveling the high and low tones for that extra clarity. The peak power handling of 400Watt, this Pyle car speaker gives a power-packed performance, giving you a feel of discotheque. Made up of Butyl rubber surround material and plastic woofer material, the Pyle PL6984BL produces warm and dark tones, as well as durability for longer usage. This 6"x9" Pyle coaxial speaker is wrapped in blue ploy injection cone that brings amazing output, with great looks. Treat you car with this Pyle car speaker and go out on a crazy drive with all your friends!
Pyle PLX32 2-Way 3.5" Car Speaker
The Pyle PLX32 is a 3.5-inch round car speaker with a polypropylene woofer cone, a 0.75-inch high temperature Ferro fluid enhanced voice coil, and a 1-inch Mylar dome tweeter. This Pyle car speaker has a 50-watt RMS and a max power of 100-watt output. With a 1.5-inch mounting depth, this 2-way car speaker includes both mounting hardware and wires. The Pyle PLX32 has a frequency response range of 60 Hz to 20 kHz, just shy of the full range of human hearing. This car speaker has an impedance of 4 ohm and works with many audio systems at a range of sound levels. The Pyle PLX32, produced by a company you can trust, is a 2-way car speaker widely available to customers. The Pyle car speaker is sleek and small, mounts easily in your vehicle with a number of mounting positions, and with its slender design can fit where you want it in your vehicle.
Pyle PLWT4 3-Way 1.5" Car Speaker
The Pyle PLWT4 car speaker offers maximum power handling capacity of 200-watts, thus producing outstanding quality sound. The frequency response of this Pyle 3-way speaker is 3KHz-30KHz, which offers uniformed sound output by balancing the highest and lowest tones proficiently. You get a distortion-free audio with 87db at 1w/1m sensitivity of this Pyle car speaker. The extended high frequency 1.5-inch Piezo driver of this Pyle 3-way speaker helps in reproducing the sound accurately. With a surface mounting system, you can comfortably fix this Pyle car speaker in your car. So, enjoy your favorite music while you are driving with the Pyle PLWT4 car speaker.
Pyle PLG63 3-Way 6.5" Car Speaker
The Pyle PLG63 is a set of three-way speakers that can be mounted in a car, usually near the rear seat. This Pyle speaker has a 6.5-inch design and colorful faceplate choices. These car speakers come in a pair and are easy to install with a 2-inch mounting diameter — there is an installation guide and suggested placement diagram. The Pyle PLG63 speakers have a dome tweeter and a rubber surround for durability and style. These Pyle speakers also have good features, such as a frequency response between 60 Hz and 22 kHz and a 240-watt peak power handling. The magnet material on these car speakers is a Strontium Ferrite for durability and style. Use Pyle PLG63 speakers to experience clear sound and a booming base while driving down the street. These speakers are a good solution for people who are not satisfied with the quality of the standard speakers that come on cars.
Pyle PL463BL 3-Way 4" x 6" Car Speakers System
Make your car journey all the more interesting with the Pyle Pl463bl. This Pyle Coaxial Car Speaker offers a power handling of 120 Watts RMS and 120 watts max for best sound quality. This Pyle Subwoofer has a frequency response of 95Hz - 20Khz which will clearly produce every sound in the musical piece clearly. The 1Â” high-temperature ASV voice coil in the Pyle Pl463bl provides a rich sound without any noise or distortion. The non-fatiguing butyl rubber surround in this Pyle Coaxial Car Speaker enhances the durability of the speaker. For an exceptional sound quality, this Pyle Subwoofer is all that you need.
Pyle PLCH42 2-Way 4" Car Speaker
70W rms/140W max power Frequency response: 70Hz - 20kHz 10 oz. magnet structure 1 high temperature ASV voice coil 1/2 dome tweeter
Pyle PPA8 1-Way Car Subwoofer
The Pyle PPA8 is a one-way car subwoofer with a stamped steel basket and a durable black paper metal cone. This Pyle car subwoofer enhances low-frequency sounds, ensuring clear, high-quality audio, while the thick paper cones provide durability and lasting performance. The material composition of the cone greatly affects the resulting sound quality and length of time for the operation. The cloth edge suspension and open mount contribute to the solid performance of this one-way car subwoofer. When choosing power ratings, it is important to ensure that the power input capability of the subwoofer matches the output of coexisting amps. This subwoofer is rated at 500 watts. The Pyle car subwoofer features dual-coil, 8-Ohm impedance. The Pyle PPA8 is intended for use in car audio systems, and it is ideal as part of a custom installation project or as a replacement. Subwoofers are an integral part of many car audio systems because they pick up the deep bass tones better than standard car stereo speakers. This Pyle car subwoofer is an ideal choice for customized or updated installations.
Pyle Pro Pdmr5 5 200w Car Dj/home Mid Bass Midrange Speaker Driver Audio
The Pyle PDMR5 is a high performance midrange car speaker that produces exceptional audio. The 200 watts peak power handling of this Pyle car speaker offers rich sound. The 5-inch Paper Coating Cone of this Pyle midrange speaker delivers clear and realistic audio. The 1-inch high temperature aluminum voice coil of this Pyle car speaker manages the air pressure level, for delivering clean audio in different frequencies. Moreover, the 450 Hz - 7 kHz frequency response of this Pyle midrange speaker delivers balanced and clean sound across all levels. The Pyle PDMR5 car speaker has 8-ohm nominal impedance that produces clearer audio with maximum sound output. The Pyle PDMR5 car speaker has a 92 dB sensitivity that gives you loud, theater-like audio
Pyle PLBS102 1-Way 10" Car Subwoofer
The Pyle PLBS102 is a 10-inch automotive subwoofer that features two standard subwoofers in one enclosure. This allows for extended bass distribution throughout an entire vehicle with ease. The Pyle car subwoofer is also enclosed in a subwoofer box that allows a user the ability to easily connect it to an existing speaker system. The subwoofer box is sealed, ported, and vented for reliability purposes. The Pyle car subwoofer boasts a total of 800 watts of peak power handling that extends and enhances the sound quality to the listener. The Pyle PLBS102 is a 10-inch automotive subwoofer that features an aluminum 2-inch voice coil, a polypropylene cone, and is surrounded with a black rubber edge suspension. These features are designed to enhance the sound quality overall. The Pyle car subwoofer has blue LED lights that light up when music is being played. The subwoofer measures 12.2 inches tall by 26 inches wide by 12.8 inches deep and is easy to install in a number of makes and models of cars.
Brand Pyle Plx62 Car Audio 6.5 2 Way 160 Watts Car Speakers Pair Black
6.5'' Polypropylene Woofer Cone 1'' Hi-Temp Ferro Fluid Enhanced Voice Coil 1'' Mylar Dome Tweeter 80 Watts RMS/160 Watts Max Power Frequency Response: 66 - 20k hz 4 Ohms Impedance Rubber Boot Magnet Cover Includes Grills, Wires and Mounting Hardware Mounting Depth: 2''Sold as : Pair
Pyle PLCH62 2-Way 6.5" Car Speaker
Created for people who care about the sound while riding around, this Pyle car speaker is flexible and dependable. Travelers and discriminating listeners are attracted by the playability and style of the Pyle PLCH62. This Pyle car speaker enables you to make out ultra-low bass tones and clean treble tones with its wide 75 Hz - 20 kHz frequency response. Bring your aural enjoyment alive with wonderful quality sound using the extraordinary drivers included with this coaxial car speaker. Crank up audio tracks at loud volumes with a well-matched audio amp thanks to the superb 86 dB sensitivity of the Pyle PLCH62. Because this Pyle car speaker has great audio quality, you can blast your selected playlists with sonic clarity. With the perfectly sized 6.5-inch full-range loudspeaker found on this coaxial car speaker, you can rapidly place it in the existing factory mounts in your vehicle. In addition, with high-end 100 watts RMS power handling, the Pyle PLCH62 produces amazing soundscapes when hooked to an appropriately powered amp.
Pyle Pro Audio 200w 5 Dome Midrange Stereo Speakers Distortion Free Speaker
PYLE PRO AUDIO 200w 5 DOME MIDRANGE STEREO SPEAKERS DISTORTION FREE SPEAKER NEW Store About Us Shipping Policy Return Policy FAQs Contact Info PYLE PRO AUDIO 200w 5 DOME MIDRANGE STEREO SPEAKERS DISTORTION FREE SPEAKER NEW 2'' Glass Fiber Diaphragm Butyl Rubber Surround2'' High Temperature Voice Coil 25 oz Magnet Structure 100 Watts RMS/200 Watts Peak Power 4-8 Ohm Impedance Sensitivity: 95dB Frequency Response: 400Hz - 6k Hz Mounting Depth: 1 1/2''Condition: Brand New Manufacturer: Pyle Mode
Pyle PDMR6 6.5" Car Speaker
Boost the music system of your car by gracing it with the dynamic PYLE PDMR6 speaker. With a frequency response of 200-5KHz, this PYLE mid-range speaker produces balanced sound output by leveling the high and low tones considerably. With a power handling of 150 Watts, this PYLE car speaker gives outstanding performance that will keep your senses alive. The PYLE PDMR6 is coated with a 6.5-inch paper cone that releases sound with amazing clarity. This PYLE mid-range speaker is sealed with a black design cover that looks stunning in your car. Get this PYLE car speaker and enhance your music to another level, making long journeys worthwhile.
2 Pyle Pdbt18 600w 3.75 Bullet Titanium Horn Tweeter Pair Car Audio Tweeters
Store About Us Shipping Policy Return Policy FAQs Contact Info New Pyle 3.75 inch Aluminum Bullet Titanium Horn Tweeters Brand New PylePro PDBT18 Pyle’s car audio products and pro audio equipment are renowned for their rugged durability and high output at an economical price. Condition: Brand New Manufacturer: PylePro Model: PDBT18 3.75'' Aluminum Horn w/1'' Super Bullet Tweeter 1'' Super Tweeter 20 oz Magnet Structure 1'' High Temperature Kapton Voice Coil Diamond Chrome Cutting Finish Ferro
Pyle PLG54 1-Way 5.25" Car Subwoofer
This Pyle subwoofer may be a cost-effective solution to upgrade or replace a vehicle's bass, offering a 2.6-lb weight and measuring 5.25 inches in diameter, with a 3.2-inch depth. With the Pyle PLG54, users will require a mounting depth of 2.88 inches, a top mounting depth of 2.2 inches, and a cutout length reaching 4.4 inches deep. Once installed, this one-way car speaker stays sturdy in its poly-plastic cone, with the rubber surround, providing a resonant bass with a long lifespan. This Pyle subwoofer handles 200 watts of sound power, pumping the low end of tunes to the forefront with an 81 dB sensitivity keeping the unit relatively efficient with its sound output. The Pyle PLG54 pairs its 1-inch voice coil with a 30-oz magnet to provide responsive, clear amplification, managing higher currents with its high-temperature aluminum construction. Individuals wiring the Pyle one-way car speaker should use a 4-Ohm impedance in circuit calculations to deliver optimal sound and unit longevity. Also with solid mid-range voicing, this Pyle subwoofer accommodates a wide variety of music genres in an all-purpose vehicle application.
Pyle PLCH52 2-Way 5" Car Speaker
Install the Pyle PLCH52 car speaker in your vehicle and enjoy high-fidelity music while driving. Boasting 160 watts of maximum power handling, this 5.25-inch Pyle car speaker ensures loud, clear sound reproduction. The 0.5-inch neodymium dome tweeter of this two-way coaxial speaker delivers smooth, clean, and detailed highs. Meanwhile, the electroplated poly injection cone of the Pyle PLCH52 speaker produces deep, rich bass with exceptional clarity. Plus, featuring a frequency response of 85 Hz to 20 kHz, this Pyle car speaker lets you listen to a whole range of sounds. Moreover, with a sensitivity rating of 88 dB, this two-way coaxial speaker efficiently converts power to clear sound.
Pyle PL42BL 2-Way 4" Car Speaker
Delivering high-quality audio with every use, the Pyle PL42BL full-range speakers are equipped with a blue poly injection cone, non-fatiguing butyl rubber surround, 0.5-inch neodymium film dome tweeter, and a high temperature voice coil. The blue poly injection cone on the Pyle 4-inch car speaker is durable and able to handle environmental changes as well as wear and tear from being in a car. The butyl rubber surround on the two-way automotive speaker ensures that the cone is able to vibrate freely to produce the wide range of sounds clearly. With the dome tweeters on the Pyle 4-inch car speaker, the high notes and sounds produced are evenly distributed throughout the car. The two-way automotive speaker comes in a set of two so that they can work together to provide an even sound as well. Additional specifications for the Pyle PL42BL include a frequency response of 110 Hz to 20 kHz, 88 dB sensitivity, a 4-Ohm impedance, and an RMS power handling of 90 watts. Due to the standard size of the Pyle 4-inch car speaker, people should be able to fit the speaker into most 4-inch OEM locations.
Pyle PLST6 0.5" Car Speaker
Listen to music the way it was meant to be heard with the Pyle 0.5-inch car speaker. This automotive speaker provides drivers with crisp, clear sound and is an ideal upgrade from standard car sound systems. For convenience and flexibility, the Pyle PLST6 has the ability to be mounted omni-directionally. This means the user is able to position speakers to the desired direction, making a variety of unconventional mountings possible and enabling the speaker to work in multiple applications. The Pyle 0.5-inch car speaker has a Mylar dome tweeter and a high-density neodymium magnet. The construction supports the delivery of 75 watts RMS or a maximum of 150 watts. This automotive speaker has an impedance level of 4 Ohms, and a Ferro Fluid cooling feature protects the speaker from damage caused by overheating. To help ensure that high frequencies are utilized, the Pyle PLST6 comes with a 12-dB crossover network. The frequency response is between 1.3 kHz and 22 kHz, and the sound pressure level for the automotive speaker is 92 dB at 1 watt per square meter. Bring clear sound quality with the Pyle 0.5-inch car speaker.
Pyle Ppa6 400-watt Professional Premium Pa 6 Woofer ( Single )
About Us Feedback Contact Us Return Policy Store home Car Audio (13) Car Speakers and Subwoofers (2) Car In-Dash Units (6) Car Installation (1) Car Alarms and Security (4) Pro Audio DJ (790) Speakers Monitors (263) Guitar and Bass Speakers (103) Live Sound and PA (40) Pro Audio Speakers (4) Speaker Components (63) Monitor Speakers (13) Woofers (28) Speaker Packages (11) Speaker Accessories (1) Headphones (34) DJ Lightning (55) DJ CD Media Players (12) Microphones (60) Signal Processors (21) Amp
Pyle PLPW8D 1-Way 8" Car Subwoofer
The Pyle PLPW8D is an 8-inch, shallow mount car subwoofer with spring loaded push down speaker terminals. Shallow mount subwoofers are used in cars when there isn't enough space to add a traditional, large size subwoofer. A car subwoofer is used to reach the lowest of bass sounds. The dimensions on this Pyle speaker are 8.2 inches in diameter by 3.7 inches in depth (20.83 cm by 9.4 cm), and the weight is 6.5 lbs (2.96 kg). The peak power handling on this Pyle speaker is 800 watts, and the RMS power handling is 400 watts. The sensitivity on the Pyle PLPW8D is 89 dB. The Pyle speaker offers a 1.5-inch, four layer, dual voice coil, and dual 4-Ohm impedance. This car subwoofer includes a black steel basket, non-press paper cone, and a specially treated foam surround. This product is sold as a single unit not a pair of speakers. The Pyle PLPW8D was designed to be used as an addition to a factory or aftermarket audio system.
Pyle PLTAB8 1-Way 8" Car Subwoofer
With a peak power handling of 250 watt, the Pyle PLTAB8 car speaker ensures you a superior audio output. A frequency response range of 30Hz to 700KHz in this Pyle car component system means that even the slightest nuance of sound can be heard clearly. This Pyle 8-inch subwoofer is a component system that significantly improves the quality of the sound. With an impedance of 4 ohms, this Pyle car component system offers high level resistance and increases bass and mid output. This enclosed Pyle 8-inch subwoofer can be installed into any space provided in your car. The Pyle PLTAB8 car speaker is sized at 8-inches and distributes sound equally.